cat Addxyz > data.list
ls -1 *mb41 | awk '{ print $1 " 41 " }' >> data.list
mbm_plot -F-1 -Idata.list  -G2 -S0/1 -N -V -X -Otest

unalias ls

THESE SCRIPTS WILL GIVE YOU 'P's AS WELL, BUT GO TO THE BOTTOM OF THE FILE
FOR THOSE THAT HAVEN'T HAD MBCLEAN OR MBPROCESS RUN ON THEM.

1)RUN MBCLEAN FIRST
cat ~/StartCsh > mbclean.list
ls -1 *mb41 | awk '{ print "mbclean -I " $1 " -G0.9/1.1 "}' >> mbclean.list
ls -1 *mb41 | awk '{ print "mbclean -I " $1 }' >> mbclean.list

chmod +x mbclean.list
./mbclean.list

unalias ls

ls -1 *p.mb41 | awk '{ print " mbbackangle -I " $1 " -P25 -N161/80 "}' > mbbackangle.list

2) RUN MBPROCESS
rm mbproccess.list
cat ~/StartCsh > mbprocess.list
ls -1 *mb41 | awk '{ print "mbprocess -I " $1 }' >>  mbprocess.list
chmod +x mbprocess.list
./mbprocess.list


3)RUN MBBACKANGLE FOR SIDE SCAN
rm mbbackangle.list
cat ~/StartCsh > mbbackangle.list
ls -1 *p.mb41 | awk '{ print " mbbackangle -I " $1 " -P25 -N161/80 "}' >> mbbackangle.list
chmod +x mbbackangle.list
./mbbackangle.list

4)MAKE DATA LIST FOR MBMOSAIC 
rm datap.list
ls -1 *p.mb41 | awk '{ print $1 " 41 " }' >> datap.list
 

5)FOR MBGRID ADD ANY EXTRA BATHYMETRY DATA TO DATA.LIST; USING UNPROCESSED FILES GIVES THE BEST RESULTS ON THESE DATA


#mbgrid -R-103/-99.5/0.3/3.5 -Idatap.list -A1 -N -E200/200m -G=10  -C2/2 -V -OTuesday
 
mbgrid -R-103/-99.5/0.3/3.5 -Idata.list -A1 -N -E200/200m -C2/2 -G=10   -OThursday
mbgrid -R-103/-99.5/0.23/3.5 -Idata.list -A1 -N -E150/150m -C4/4 -G=10   -OGTJ_Final
mbgrid -R-100/-95/-0.5/1.7 -Idata.list -A1 -N -E150/150m -C4/4 -G=10   -OCNR_Final

mbmosaic -Idatap.list -E150/150/m -R-103/-99.5/0.3/3.5 -Yangle_priority.dat -F0.10 -G=-10  -OssThursday -A4 -N -C2 -V

grdcut IR_region_all_noET.grd -R-102.8/-99.5/0.3/3.5 -GGTJRegion_Lucy.grd
grdedit GTJRegion_Lucy.grd -A -R-102.8/-99.5/0.3/3.5 -V
grd2xyz GTJRegion_Lucy.grd > GTJRegion_Lucy.xyz