+--------------------------------------------------------------------------+
|                          KNORR CRUISE SYNOPSIS                           |
+--------------------------------------------------------------------------+

Voyage - Leg:       KN 185
Voyage Dates:       23 Aug-07 Sept 2006
Chief Sci(s):       William Hodgkiss, David Knobles (Lynch)
Address:            Marine Physical Laboratory
                    Scripps Institution of Oceanography
                    La Jolla, CA 92093-0701
Phone:              858-534-1798
Email:              whodgkiss @ucsd.edu
Cruise Objective:   ONR SW06 experiment. We will be deploying acoustic
                    arrays and carrying out acoustic source tows.
Science Activities:
Operations Area:    NA6
                    39 deg 1.5'N, 73 deg 4.0'W
                    70-80 m

SSSG Tech:             sssg @knorr.whoi.edu
Departure Port:        Woods Hole, MA
Agent:                 Master R/V Knorr
                       Attn: Scientist's Name
                       c/o WHOI
                       266 Woods Hole Rd.
                       Woods Hole, MA 02543

                       Contact: Elizabeth Caporelli
                       tel. (508) 289-2277
                       fax: (508) 457-2185
                       email: ecaporelli @whoi.edu
Arrival Port:          Woods Hole, MA
Agent:                 Same as above
Installed Scientific   12 & 3.5 kHz
Equipment:             CTD - 24X10L (EC 8/2 science party will provide
                       internal recording CTD or use the Knorr's CTD w/o
                       Rosette or niskins)
                       IMET
                       Seabeam
                       XBT
                       ADCP 75kHz may be needed EC 8/2
WHOI-Provided Science  SWAP - wireless ship network
Tools:
Program-Provided       ARL/UT will bring two winches for deploying their
Science Tools:         acoustic arrays and towed source.
                       container - 20 ft (MPL/SIO)
                       container - 20 ft (ARL/UT)
Shipboard              Doppler / GPS Navigation
Equipment/Nav:
Other Requirements:    Night Work Anticipated

                       CTD casts 20 min per station, 40-50 casts along the
                       track EC 8/2
                       XBT- science party may not need them, will provide
                       xbts and additional info if required EC 8/2
                       Preston Wilson: has 150lb deployment, 50 deployments
                       during cruise. EC 8/2
                       (1) 20 ' lab van ~17 to 20,000-lbs. 2nd van will be
                       loaded or contents will be unloaded onto the ship,
                       van will stay at WHOI. EC 8/2

                       Deck winch with electric motor:  Requires 440 VAC, 3
                       phase, 60 Hz, 25 amps. Can be wired for 208 VAC at
                       double (50) amps. 440 VAC is preferred and assumed.
                       ARL will provide 50' AWG#6 (65 amp rating) 4 wire
                       (allows safety ground) cable power cable.(JD 7-27)

                       Lab Van:  Requires 1 phase, either 220 VAC at 50
                       amps (preferred) or 440 VAC at 25 amps. The 220 VAC
                       is preferred because equipment uses 220 VC and we
                       would have to use a step down transformer to change
                       440 VAC to 220 VAC (which ARL owns) (JD 7-27).
Notes:
Navy Clearance Status:

Last Modified: 12/14/2006

Check List:          Required?          Comments
US Customs Form      No
Explosives Clearance No
Isotope Use Approval No
Diplomatic Clearance No
SCUBA Diving         No